 |
|||
|
|
|||
|
|
|||
|
Sport-Touring Bikes *Click on images for a larger view* Fuel Cells for long distance riding! Automotive fuel cells just don’t cut it for long distance motorcycle travel. But they do give us a basis from which to start. Our Fuel Cells have 2,3,4 and 5 gallon capacities and can be outfitted with any type of plumbing that you may want. You can even specify where the fittings are placed on the cell. Internal baffles or fuel foam are available to prevent the fuel from sloshing around and foaming. Various types of filler caps are available – you get the type you want. As a finishing touch, we will powdercoat you cell any color you like as long as it’s not pink.
Custom Sized 3.5 gallon cell.
Filler cap and plumbing locations were specified by our Customer.
Square loops on the side of the cell for tying down light weight objects such as water bottles.
3/8” NPT fittings specified by our Customer. All of our fuel cells come with a ground block fitted to ground the cell to the frame of the bike, thus preventing static discharge.
Honda ST1100 luggage rack prior to powder coating. Any size rack that you can dream up, I can make. Powdercoated in satin black, matte or high gloss. Other colors also available! Carbon fiber racks also available!!! Racks for BMW R1150 GS’s too!
ST rack prior to powder coating. Made from .250” thick 6061 aluminum. Slots can be located wherever you want in order to fit specific items on the back of your bike. No more compromising with ill fitting racks!
ST Lites Driving light mounts for ST1100 and ST1300 for lighter weight driving and fog lights.. Made from aluminum and then powdercoated black. So small that you won’t even notice that they are there. Lights are Hella Optilux.
View from behind. Mirror cover must be notched slightly for the bracket to clear.
Detailed picture of the bracket. These brackets have over 20,000 miles on them with no problem at all!
Mirror Mount made from aluminum and Powdercoated black, these nifty mounts attach to your clutch and brake lever perch using two supplied stainless bolts. They can be tapped to accept mirrors as in this picture or to accept RAM mounting balls to use with your GPS. Since they’re custom made, you determine the thread sizes, diameter, length as well as powder color.
Perch mount Close up of the perch mount used in the mirror mounts. A very versatile design to attach just about anything to your bike; GPS units, cameras, XM / Sirius radios, etc
ST1300 preload spacers. Fits under the rear shock spring to give you more adjustment to your preload settings. This spacer allows you to get the correct static sag while retaining adjustment. Powdercoated a bright red to alert mechanics that they have been installed. Just the thing for rider’s carrying heavier loads on their bikes.
ST1300 radio antenna mount. Mounts under the tail section using the bolts for the stock luggage rack. Use with CB, XM/Sirius and Ham radio antennas. Short version for most ST’s and a longer version for those with topboxes.
Detailed picture of the antenna mount. Tie holes for securing the wire and drilled into the mount for a tidy appearance. Made from aluminum and then powdercoated.
|
|||
|
All the contents contained within this site are owned by Earache Motorsports, and unauthorized copying or use without permission is prohibited. Website design by: Phil |
|||
